RING SIZING

 

Lets help find your ring size!

My top recommendation is to head to your local jeweller/jewellery store and get sized there for the most accurate measurement.

If you already have a ring that fits the finger you are wanting to put on, you can measure the inside diameter and check this measurement against the chart below. You can do this by placing your ring directly over a ruler measuring the widest part. Just make sure your measurement is as accurate as possible, because just half a mm makes a difference. 

You can also use a piece of string to measure the circumference of your finger. To do this, measure the widest part of your finger and compare to the size chart below.

 

This is a good place to note that I do not offer ring resizing & can not provide exchanges, refunds or returns if you have purchased the wrong size ring so please choose wisely. 

 

For rings with a wider/thicker band, I recommend sizing up half a ring size to a full size to accomodate for the extra width for the ring.

As a general rule I would recommend ordering slightly smaller if you’re unsure. This is because if the ring happens to be too small, making it slightly bigger is easy to do! It can be done by any local jeweller for a low cost. However if the ring is too big, making it smaller isn’t as easy and will likely cost you more than resizing bigger. Part of the metal band needs to be cut away and re-soldered. 

 

If you still have questions about this or would like to try on a ring at my home studio in Perth before purchasing, please reach out x